My literature
|
|
My work is referred at:
-http://www.museweb.com/ag/instrument.html
Original Scientific Paper1. SALI, Samo, KOPAC, Janez. The influence of different machining processes on the acoustic properties of wooden resonant boards. CAS j., 1998, vol. 3, no. 5, series II, p. 15-21. [COBISS.SI-ID 2580507] 2. KOPAC, Janez, SALI, Samo. The frequency response of differently machined wooden boards. J. Sound Vib., 1999, vol. 227, no. 2, p. 259-269. (URL): http://www.idealibrary.com (article no. jsvi.1999.2246). [COBISS.SI-ID 3439899] 3. SALI, Samo, KOPAC, Janez. Measuring the quality of guitar tone. Exp. mech., 2000, vol. 40, no. 3, p. 242-247. [COBISS.SI-ID 3843867] 4. KOPAC, Janez, SALI, Samo. Tool wear monitoring during the turning process. J. mater. process. technol. [Print ed.], 2001, vol. 113, no. 1/3, special issue "5th APCMP, Seoul, Korea", p. 312-316. http://www.elsevier.nl/cdweb/journals/09240136/viewer. htt?iss=1-3&vol=113. [COBISS.SI-ID 4431643] 5. SALI, Samo. Frequency response function of a guitar - a significant peak. CAS j., 2002, Vol. 4, No. 6, series II, p. 31-36. [COBISS.SI-ID 5647131] 6. KOPAC, Janez, SALI, Samo. Wood : an important material in manufacturing technology. J. mater. process. technol. [Print ed.], 2003, Vol. 133, No. 1/2, p. 134-142. http://www. sciencedirect.com/science/journal/09240136. [COBISS.SI-ID 5167899]
Expert paper7. SALI, Samo, KOPAC, Janez. Sound improvement of a guitar with rule of consonance-dissonance and addditional brace trimming on a soundboard. Bilten - Slov. muzikol. druš., 1997, Vol. 8, p. 17-23. [COBISS.SI-ID 2533915] 8. JURKOVIC, Joze, SALI, Samo. The dynamic properties of composite supporting parts for machines. Stroj. vestn., 2002, Vol. 48, No. 3, p. 143-157. [COBISS.SI-ID 5325083]
Popular paper9. SALI, Samo. About a guitar - from a tree to a sound. Part 1. EPTA bilt., 2001, No. 3, p. 87-89. [COBISS.SI-ID 4905499]
Published paper for a scientific conference10. SALI, Samo, KOPAC, Janez. Improvement of guitar sound by machining. V: KATALINIC, Branko (ed.). Proceedings of the 8th International DAAAM Symposium, 23-25th October 1997, Dubrovnik, Croatia. Vienna: DAAAM International, 1997, p. 293-294. [COBISS.SI-ID 2271259] 11. SALI, Samo, KOPAC, Janez. The influence of different machining processes on the acoustic properties of wooden resonant board. V: KEEFE, Douglas (ed.), ROSSING, Thomas (ed.), SCHMID, Charles (ed.). ISMA '98, International Symposium on Musical Acoustics 1998, Leavenworth, Washington, June 26 - July 1, 1998. Proceedings. Woodbury, NY: Acoustical Society of America; Montclair, NJ: Catgut Acoustical Society, [1998], p. 121-126. [COBISS.SI-ID 3727387] 12. KOPAC, Janez, SALI, Samo. Acoustic emission in drilling steel and gray iron. V: DOBRZAŃSKI, Leszek A. (ed.). Proceedings of the 8th International Scientific Conference Achievements in Mechanical & Materials Engineering AMME'99, Gliwice-Rydzyna-Pawłowice-Rokosowo, Poland, October 24-27, 1999. Gliwice: Institute of Engineering Materials and Biomaterials, Organizing Committee, 1999, p. 321-324. [COBISS.SI-ID 3367451] 13. KOPAC, Janez, SALI, Samo. Acoustic emission in drilling. V: SOKOVIC, Mirko (ed.). Proceedings of the Workshops on Model-based monitoring systems for cutting tools and processes, Budapest - Ljubljana, 1997-98. Ljubljana: Faculty of Mechanical Engineering, 1999, p. 55-63. [COBISS.SI-ID 3308059] 14. SALI, Samo, KOPAC, Janez. Modelling of frequency response function of a guitar. V: KATALINIC, Branko (ed.). Annals of DAAAM for 2000 & Proceedings of the 11th International DAAAM symposium "Intelligent Manufacturing & Automation: Man - Machine - Nature", University of Rijeka, 19-21st October 2000, Opatija, Croatia. Vienna: DAAAM International, 2000, p. 415-416. [COBISS.SI-ID 3990555] 15. POGACNIK, Marjan, KOPAC, Janez, SALI, Samo. Some theoretical bases and practical results of turn-milling optimisation. V: CEBALO, Roko (ed.), SCHULZ, Herbert (ed.). CIM 2000, 6th International Scientific Conference on Production Engineering, Lumbarda, KorCula, Croatia, June 8-9, 2000. Computer integrated manufacturing and high speed machining. Zagreb: Croatian Association of Production Engineering, 2000, p. I-047 - I-056. [COBISS.SI-ID 3746075] 16. SALI, Samo, KOPAC, Janez. Measuring a frequency response of a guitar. V: WICKS, Alfred L. (ed.), DEMICHELE, Dominick J. (ed.). Proceedings of IMAC-XVIII: A Conference on Structural Dynamics, San Antonio, Texas, February 7-10, 2000, (Proceedings of the International Modal Analysis Conference & Exhibit, 18). Bethel, Connecticut: SEM, 2000, vol. II, p. 1375-1379. [COBISS.SI-ID 3541019] 17. SALI, Samo, KOPAC, Janez. A specific cutting force in face milling of wood. V: KATALINIC, Branko (ed.). Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Precision Engineering" : Jena University of Applied Sciences, 24-27 October 2001, Jena, Germany. Vienna: DAAAM International, 2001, p. 423-424. [COBISS.SI-ID 4839451] 18. SALI, Samo, KOPAC, Janez. Optimisation of guitar quality. V: CEBALO, Roko (ed.), SCHULZ, Herbert (ed.). 7th International Scientific Conference on Production Engineering, Lumbarda, KorCula, Croatia, June 14-15, 2001. CIM 2001 : computer integrated manufacturing and high speed machining. Zagreb: Croatian Association of Production Engineering, 2001, p. VI-129 - VI-137. [COBISS.SI-ID 4416539] 19. SALI, Samo, KOPAC, Janez. Brace trimming for tone improvement of a guitar. V: WICKS, Alfred L. (ed.), SINGHAL, Raj (ed.). Proceedings of IMAC-XIX: a Conference on Structural Dynamics, Kissimmee, Florida, February 5-8, 2001, (Proceedings of the International Modal Analysis Conference & Exhibit, 19). Bethel, Connecticut: SEM, cop. 2001, vol. I, p. 805-810. [COBISS.SI-ID 4185371] 20. KOPAC, Janez, STOIC, Antun, SALI, Samo, SAMARDZIC, Ivan. The relation between the sound pressure and tool vibrations during the turning process. V: CEBALO, Roko (ed.), SCHULZ, Herbert (ed.). 8th International Scientific Conference on Production Engineering, Brijuni, Croatia, June 13-14, 2002. [CIM 2002] : computer integrated manufacturing and high speed machining. Zagreb: Croatian Association of Production Engineering, 2002, p. I-081 - I-091. [COBISS.SI-ID 5251867] 21. SALI, Samo, KOPAC, Janez. Positioning of braces on a guitar soundboard. V: WICKS, Alfred L. (ed.), SINGHAL, Raj (ed.). Proceedings of IMAC-XX: a Conference on Structural Dynamics, Los Angeles, California, February 4-7, 2002, (Proceedings of the International Modal Analysis Conference & Exhibit, 20). Bethel, Connecticut: SEM, 2002, vol. 1, p. 709-715. [COBISS.SI-ID 4968731]
Published abstract for a scientific conference22. KOPAC, Janez, SALI, Samo. Wood - important material in manufacturing technology. V: DOBRZAŃSKI, Leszek A. (ed.). Proceedings of the 7th International Scientific Conference Achievements in Mechanical & Materials Engineering AMME'98, Gliwice-Zakopane, Poland, 29 Nov - 2 Dec 1998, "Extended abstracts" volume. Gliwice: International Scientific Committee AMME '98, Organizing Committee, 1998, p. 275-278. [COBISS.SI-ID 2875931] 23. POGACNIK, Marjan, KOPAC, Janez, SALI, Samo. Some theoretical bases and practical results of turn-milling optimisation. V: CEBALO, Roko (ed.). CIM 2000, 6th International Scientific Conference on Production Engineering, Lumbarda, KorCula, Croatia, June 8-9, 2000. Computer integrated manufacturing and high speed machining : knjiga sazetaka. [Zagreb]: Hrvatska udruga proizvodnog strojarstva, 2000, p. I-047. [COBISS.SI-ID 3746587] 24. SALI, Samo, KOPAC, Janez. Optimisation of guitar quality. V: CIGLAR, Damir (ed.). CIM 2001, 7th International Scientific Conference on Production Engineering, Lumbarda, KorCula, Croatia, June 14-15, 2001. Computer integrated manufacturing and high speed machining : knjiga sazetaka. [Zagreb]: Hrvatska udruga proizvodnog strojarstva, 2001, p. VI-129. [COBISS.SI-ID 4413979] 25. KOPAC, Janez, STOIC, Antun, SALI, Samo, SAMARDZIC, Ivan. A comparison of noise signal and acceleration of a tool holder during the turning. V: CIGLAR, Damir (ed.). CIM 2002, 8th International Scientific Conference on Production Engineering, Brijuni, Croatia, June 13-14, 2002. Computer integrated manufacturing and high speed machining : knjiga sazetaka. [Zagreb]: Hrvatska udruga proizvodnog strojarstva, [2002], p. I-081. [COBISS.SI-ID 5252635]
Other papers26. SALI, Samo. Algorithm for optimisation of the acoustic response of wood : reports. Stroj. vestn., 2000, Vol. 46, No. 2, p. 136-141. [COBISS.SI-ID 3660315] Educational material27. KOPAC, Janez, SALI, Samo. The bases of high speed machining : material for lectures related on a program SOCRATES ERASMUS. Ljubljana: Faculty of Mechanical Engineering, 2002. [COBISS.SI-ID 5643803] 28. SALI, Samo, KOPAC, Janez. Machining technique and experimental methods - basis with examples (book for students at Faculty of Mechanical Engineering). Ljubljana, Faculty of Mechanical Engineering, 2003. ISBN 961-6238-74-4. [COBISS.SI-ID 125650944]
Doctor's thesis29. SALI, Samo. Algorithm for optimization of the acoustic response of wood, Faculty of Mechanical Engineering, Ljubljana, 1999. [COBISS.SI-ID 3350811]
Master's thesis30. SALI, Samo. The influence of cutting on the acoustic properties of wood, Faculty of Mechanical Engineering, Ljubljana, 1997. [COBISS.SI-ID 1935131]
Diploma30. SALI, Samo. Influence of cutting process on the acoustic properties of wood, Faculty of Mechanical Engineering, Ljubljana, 1993. [COBISS.SI-ID 1010971]
|